IP Series Tower Equipment

IP Series Base Stations

IPMobileNet state-of-the-art base stations are designed specifically for the stringent requirements of mobile communications systems. The IP Series base stations act as a communications hub for the mobiles in the network.

The IP Series base stations greatly reduce the damaging effects of multi-path fading with patented triple-receiver Intelligent Diversity Reception. They support unmatched frequency stability and offer full duplex operation, CW identifier, and continuous duty, full power transmit operation. The base stations are only 1.75 inches high (one rack unit),and meet or exceed EIA/TIA specifications for shock, vibration, humidity, and temperature variations.

Mounted in a rack at the tower site, base stations have four (4) type N connectors (one transmit and three separate receive) which may be duplexed at the site. Base stations operate on standard 13.8 VDC, consuming less than 2 amps of current. When matched with IP.PA power amplifier, transmit power is increased up to 150 watts.

High Speed Base Stations for UHF, 700 MHz and 800 Mhz

IP Power Amplifier

The power amplifier increases transmit power at the base station to 80, 100, or 150 Watts to increase coverage. Amplifiers have extensive heat management to support continuous full-power operation.
Integral to each power amplifier is input and output RF monitoring which can be configured locally or over the network and reports status via SNMP.

IP.PA Power Amp for UHF, 700 MHz and 800 Mhz